SPRAY FOAM INSULATION SPECIALISTS
Spray Foam Insulation for Home & Garage
SRAY FOAM
REDUCE UTILITY BILLS
SPRAY FOAM INSULATION
Whether you are having a new home built or renovating an existing home.
Greener Solutions can add Spray Foam Insulation just about everywhere you need it.
Greener Solutions uses spray foam free of formaldehyde that does not release emissions in order to protect the surrounding environment.
Spray Foam improves the air quality in your home freeing you from exposure to contaminants, allergens or other health risks. Just as we care about the safety of the environment, we care about the safety of you and your family/employees.
Air moves in and out of a home through every crack and crevice. Approximately one-third of air infiltrates through walls, ceilings and floors and approximately 56% of the energy used in a typical residential setting is from heating and cooling. These numbers are drastically reduced by the use of spray foam.
We offer free insulation quotes for Sprayfoam insulation & Blow-In Insulation.
AG BUILDINGS
COMMERCIAL
HOME
GARAGE
Spray foam is the most cost-effective solution to improve energy efficiency and comfort by sealing and insulating the shell of your home.
Closed Cell Spray Foam
At Greener Solutions Spray Foam we use closed-cell spray foam.
The closed-cell spray foam weighs in at 2 pounds per foot and is rigid. In closed-cell spray foam, the blowing agent is trapped inside the closed cells to increase the R-Value of the foam. When sprayed, the two-part liquid expands about 30 to 40 times its size in a matter of seconds.
The general R-Value of most closed-cell foams is 6 to 7 per inch. After 2 inches closed-cell spray foam can be used as a vapour retarder. The closed-cell foam creates an air seal and is an excellent choice for both indoor and outdoor projects.
The closed-cell spray foam is very durable and has a tensile strength of about 25 pounds per square inch. Increase the strength of your building while investing in insulating your structure.
The Differences Between Open Cell & Closed Cell Polyurethane Spray Foam
Polyurethane spray foam is a growing and popular method of providing insulation.
Polyurethane spray foam is now used for aspects of insulating a building. Including insulation below concrete slabs. Insulation during and after construction. For around drafty windows and doors and to attic and crawl spaces.
The benefits of spray foam, as opposed to other types of insulation. Including quick application and the ability to insulate hard-to-reach locations. As well as locations impossible to insulate with traditional methods and products.
There are two primary types of polyurethane spray foams, known as OPEN CELL and CLOSED CELL.
They differ in densities and other aspects.
Closed Cell Polyurethane Spray Foam
Closed cell is the denser and more common of the two types of polyurethane spray foam. The common measurement system for foam resistance to heat flow (i.e., insulation) is a foam’s “R-Value.” Closed-cell polyurethane foams have higher R-values than other types of foam, around 6.0 per inch, although some stronger ones have R-values of 7.14 per inch and higher. Closed cell foams feature better insulation because of this resistance, and are also more resistant to water degradation or penetration, which includes moisture build-up. Moisture can eventually attract bacterial growth, promoting mould, which can eat away at wood and compromise structural integrity. Preventing moisture migration can help greatly curb mould growth.
Closed cell foams are also dense enough to insulate air, preventing drafts and keeping in regulated temperatures. This density also prevents mould growth because temperature control can cut down on humidity, which spawns mould. In order to maintain their resistance, closed-cell foams are usually dense and strong, and resemble solids when they fully form. This strength not only helps to insulate buildings and appliances but can also strengthen walls to which it is applied.
Open Cell Polyurethane Spray Foam
Closed cell is the denser and more common of the two types of polyurethane spray foam. The common measurement system for foam resistance to heat flow (i.e., insulation) is a foam’s “R-Value.” Closed-cell polyurethane foams have higher R-values than other types of foam, around 6.0 per inch, although some stronger ones have R-values of 7.14 per inch and higher. Closed cell foams feature better insulation because of this resistance, and are also more resistant to water degradation or penetration, which includes moisture build-up. Moisture can eventually attract bacterial growth, promoting mould, which can eat away at wood and compromise structural integrity. Preventing moisture migration can help greatly curb mould growth.
Closed-cell foams are also dense enough to insulate air, preventing drafts and keeping in regulated temperatures. This density also prevents mould growth because temperature control can cut down on humidity, which spawns mould. In order to maintain their resistance, closed-cell foams are usually dense and strong, and resemble solids when they fully form. This strength not only helps to insulate buildings and appliances but can also strengthen walls to which it is applied.
Break down your Insulation project into smaller, manageable payments with financing.
We’ve partnered with Finance-It to offer you affordable monthly payment options. The application process only takes a few minutes and you’ll find out if you’re approved in seconds.
Financeit is the effortless, mobile-friendly way to pay for large purchases in low installments.
Greener Solutions Spray Foam is properly suited for all types of spray polyurethane foam insulation jobs.
From pole barns, shops, and quonsets to storage tanks, commercial buildings or even crawl spaces it is the proven best solution for you.
Sprayfoam & Blown-In Insulation
Greener Solutions provides services in Sprayfoam and Blown-in Insulation.
We service all areas in Saskatchewan.
Saskatoon & Regina Insulation Company
Spray Foam Insulation & Blown-In Insulation
We’ve partnered with Finance-It to offer you affordable monthly payment options. The application process only takes a few minutes and you’ll find out if you’re approved in seconds.
Finance-It uses bank-level encryption to protect your personal information. Finance-It also provides a fair and transparent experience.
